-
- stere firewood cut in 25 cm oak, hornbeam, beech, dry ash
- FROM 3 STÈRES > €66 per stere
- FROM 6 STÈRES > €61 per stere
- FROM 8 STÈRES > €59 per stere
- stere firewood cut in 25 cm oak, hornbeam, beech, dry ash
Type of wood: 100% hardwoods (oak, hornbeam, beech, ash).
Origin France.
Calorific value: 2000 kWh/stere.
Our 25 cm Logs are made of hard and deciduous woods: oak, hornbeam, beech, dry ash. recognized as the best firewood.
Hardwood is more suitable for continuous burning stoves because it needs to be reloaded less often.
This category of hardwoods is ideal for heating . Oak, beech, ash, hornbeam, produce beautiful flames and lots of embers which remain incandescent for a long time and their density limits the frequency of loading.
- Split, dried, this log of wood offers an exceptional calorific value and a very low humidity rate (-20%).
- Dry wood all winter delivered in bulk
- Logs from the ADN CHAUFFAGE network make it easier to use your wood-burning appliance. Indeed, thanks to its low humidity rate (<20%), you obtain maximum energy efficiency without the constraints of wood: no storage or cutting necessary.
- The ADN CHAUFFAGE wooden logs are already split , brushed and cut into 25, 30, 40 and 50 centimeters.
- ADN CHAUFFAGE offers you a delivery of its wood logs in bulk thanks to its distribution network. Thus, you have dry firewood available (mixture of oak, hornbeam, beech, ash ) in the quantities required throughout the heating period.
- Maximum calorific value without constraint.
- ADN CHAUFFAGE wood logs are ready to use. As soon as your firewood is delivered in bulk, you can immediately use it to heat yourself and enjoy the pleasures of a wood fire. Indeed, our logs are already cut and split into small sections and dried.
- An economical and practical solution
- Our logs ensure 30% less consumption. You also increase the life of your appliance and flue because our extra dry logs generate 2 to 3 times less ash and limit the fouling of your installation. Compared to traditional firewood containing ≈ 30% moisture